Διερεύνηση της επίδρασης διαφορετικών πιεζοηλεκτρικών αισθητήρων και του υλικού σύζευξης στην καταγραφή ακουστικών εκπομπών από δοκίμια πετρωμάτων.
Φόρτωση...
Ημερομηνία
2024
Συγγραφείς
Τίτλος Εφημερίδας
Περιοδικό ISSN
Τίτλος τόμου
Εκδότης
ΕΛΜΕΠΑ, Σχολή Μηχανικών (ΣΜΗΧ), Τμήμα Ηλεκτρονικών Μηχανικών
Επιβλέπων
Περίληψη
Στην παρούσα εργασία διερευνάται η ευαισθησία και η απόδοση συστήματος
καταγραφής Ακουστικών Εκπομπών (ΑΕ) όπου γίνεται χρήση διαφορετικών
αισθητήρων καθώς και διαφορετικού υλικού σύζευξης μεταξύ του αισθητήρα
και του διαμορφωμένου δοκιμίου πετρώματος όπου αυτοί τοποθετούνται. Για
το σκοπό αυτό, χρησιμοποιήθηκαν οι πιεζοηλεκτρικοί αισθητήρες pico και
R15A του οίκου Mistras και οι καταγραφές των ΑΕ ελήφθησαν από δοκίμια
πορώδους πετρώματος Αλφά (ανοικτό πορώδες 23.5±0.8 %). Πραγματο ποιήθηκαν δοκιμές σπασίματος μύτης μολυβιού (Lead Pencil Break Test,
LPBT) σε διαμορφωμένα δοκίμια πετρώματος, οι οποίες προσομοιάζουν πολύ
καλά πηγές ΑΕ λόγω δημιουργίας μικρορωγμών εντός εύθρυπτων υλικών,
όπως είναι τα πετρώματα. Για την καταγραφή των κυματομορφών,
χρησιμοποιήθηκε πολυκάναλο σύστημα καταγραφής ΑΕ (Physical Acoustics
Corporation) με τέσσερις πιεζοηλεκτρικούς αισθητήρες, κατάλληλα
προσαρμοσμένους στις παράπλευρες επιφάνειες των δοκιμίων. Ως υλικά
προσαρμογής των αισθητήρων χρησιμοποιήθηκαν η θερμή κόλλα σιλικόνης
και η γέλη πετρελαίου (βαζελίνη). Σε κάθε περίπτωση, η θερμοσιλικόνη
χρησιμοποιήθηκε για τη στερέωση των αισθητήρων πάνω στην επιφάνεια των
δοκιμίων.
Πραγματοποιήθηκε συγκριτική μελέτη των ακουστικών παραμέτρων (πλάτος,
ενέργεια, διάρκεια κτύπων, κ.ά.) και των φασματικών χαρακτηριστικών των
καταγεγραμμένων κυματομορφών από τις δοκιμές LPB, με διαφορετικούς
συνδυασμούς των αισθητήρων και του υλικού σύζευξης τους, σε στεγνά και
κορεσμένα με νερό δοκίμια πετρώματος Αλφά. Προέκυψαν συμπεράσματα για
τη βέλτιστη χρήση των αισθητήρων και των υλικών σύζευξης, ανάλογα με το
μέγεθος και τη γεωμετρία των δοκιμίων πετρώματος Αλφά.
In the present work, the sensitivity and performance of an Acoustic Emission (AE) recording system is investigated using different sensors as well as different coupling material (couplant) between the sensor and the shaped rock sample. For this purpose, the pico and R15A piezoelectric sensors from Mistras Group were used and the AE recordings were obtained from samples of porous Alpha rock (open porosity 23.5±0.8 %). Lead Pencil Break Tests (LPBT) were performed on shaped specimens, which very well simulate AE sources due to the formation of microcracks within brittle materials such as rocks. To record the waveforms, an AE (Physical Acoustics Corporation) multichannel recording system was used with four piezoelectric sensors, properly adapted to the lateral surfaces of the samples. Warm silicone and petroleum jelly (vaseline) were used as couplant materials. In each case, thermo-silicone was used to mount the sensors onto the surface of the samples. A comparative study of the acoustic parameters (amplitude, energy, duration, etc) and spectral characteristics of recorded waveforms from LPB tests with different combinations of sensors and their coupling material was performed on dry and water-saturated Alpha rock samples. Conclusions were drawn on the optimal use of sensors and couplants, depending on the size and geometry of the rock specimens.
In the present work, the sensitivity and performance of an Acoustic Emission (AE) recording system is investigated using different sensors as well as different coupling material (couplant) between the sensor and the shaped rock sample. For this purpose, the pico and R15A piezoelectric sensors from Mistras Group were used and the AE recordings were obtained from samples of porous Alpha rock (open porosity 23.5±0.8 %). Lead Pencil Break Tests (LPBT) were performed on shaped specimens, which very well simulate AE sources due to the formation of microcracks within brittle materials such as rocks. To record the waveforms, an AE (Physical Acoustics Corporation) multichannel recording system was used with four piezoelectric sensors, properly adapted to the lateral surfaces of the samples. Warm silicone and petroleum jelly (vaseline) were used as couplant materials. In each case, thermo-silicone was used to mount the sensors onto the surface of the samples. A comparative study of the acoustic parameters (amplitude, energy, duration, etc) and spectral characteristics of recorded waveforms from LPB tests with different combinations of sensors and their coupling material was performed on dry and water-saturated Alpha rock samples. Conclusions were drawn on the optimal use of sensors and couplants, depending on the size and geometry of the rock specimens.
Περιγραφή
Λέξεις-κλειδιά
Ακουστικές Εκπομπές, πιεζοηλεκτρικοί αισθητήρες, Δοκιμή σπασίματος μύτης μολυβιού, υλικό σύζευξης, Acoustic Emissions, piezoelectric sensors, Lead Pencil Break Test, couplants